E31 means that there were three or more bad symbols at the C1 stage. For detailed measurement data, visit the corresponding pages. The results is not considered as good. Storage by Rick Broida Nov 12, Furthermore, this high writing speed, did not affect at all the writing quality, making the majority of the burns exceptional. Storage by Rick Broida Oct 24,
|Date Added:||24 April 2018|
|File Size:||58.71 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
It seems that the Pioneer drive handles the various different defects on the surface of a disc in the ddvr manner. There are also fingerprints sized between 65 and 75 micrometers. The current TDV also checks the error correcting capabilities of the drive and includes scratches from cvr.
ProdiscS05 burned at 16x. Storage by Rick Broida Sep 26, Although there were few skipped samples, the maximum Errors Loudness level is a little high, at In the following table we have gathered the findings of the DVD quality measurement tests.
The checking status is shown graphically in real time while you can save the error graph at the end of the test. These are the ones you should grab. For this test and every test with CD-R media from now on 215gk, the CD-R disc was burned to its maximum capacity and at its maximum speed.
Discs with higher BLER are likely to produce uncorrectable errors. Also, we dv to measure all the media burned at the maximum available writing speed. TYG03 burned at 20X.
It also provides the capability to measure signal parameters related to pit geometry, such as asymmetry and reflectivity.
These tracks are referred to as Check Level-1 through Check Level Five tracks on the disc contain a sequence of progressively more difficult tests. All tests are carried out at the speed of 4X.
Pioneer DVR-215BK – DVD±RW (±R DL) / DVD-RAM drive – Serial ATA – internal
Storage by Rick Broida Oct 10, E32 means that there were three or 215bkk bad symbols in one block at the C2 stage, and therefore this error is not correctable. The beginning of the second layer is located in the outer part of the disc, so the drive starts reading from the outer tracks and progresses towards the inner part of the disc.
The drive managed to burn svr media with speeds within specs, which, by the way, are very good. The case remains even when an adapter is used. E31 means that there were three or more bad symbols at the C1 stage.
Furthermore, this high writing speed, did not affect at all the writing quality, making the 2115bk of the burns exceptional.
Digital errors exceed limits. There are three measurement modes: Act like your business depends on them Backups: If you click on the images you can see a more detailed table, indicating error levels.
Storage by Rick Dr Oct 24, In each of the following pages, you will find detailed information about each disc, dvd burning and reading procedure as well as the related signal measurements that construct the overall quality picture for each disc. CIRC error correction uses two principles to detect and correct errors. The two layers of a PTP DVD-ROM disc are read sequentially with the drive starting reading from the inner part of the disc, which is the beginning of each layer, progressing towards its outer range.
An average burn here.
Pioneer DVR BK – Printer Friendly version
The drive started recording using a 18X CAV strategy, which changed to a strategy for 16X at around 2. Be respectful, keep it civil and stay on topic. The higher the Check Level passed, the more reliable the sound reproduction of the tested drive. BLER Block Error Rate is defined as the number of data blocks per second dve contain detectable errors, at the input of the C1 decoder.